Ip Camera Tool - Ebode IPV38 Guide Utilisateur

The IPV38 is designed as an Indoor Camera should be installed indoors only.
Do not touch the lens of the IP Camera. The optimum focus range has been set for you. If you turn the lens, it may cause
incorrect focus and blurry images.
Do not turn the Pan/Tilt by force, it may cause damage to internal components of the Pan/Tilt mechanism. Only when the
Pan / Tilt system is not working properly anymore you are allowed to carefully move the camera left or right until a loud
click is heard.
For firmware upgrading or connection with an external device, refer to detailed instructions contained in the CD.
Caution: On the first run of the program "IP Camera Tool" you might get a Windows Security Alert Popup. It will ask you
to choose a setting for the firewall. Please make sure you choose the 'UNBLOCK' option. Your IP camera will not work
without unblocking the firewall settings.

1.7 IP Camera Tool

When the Device has been installed properly, you can double-click the Icon "IP Camera Tool"
and a dialog box shown in Figure 1.9 will pop up.
Figure 1.9
Note: The software searches IP Servers automatically over your LAN. It may take a few minutes before the IP address
appears in the list. There are 3 cases:
Jul 2013 10 IPV38 / IPV38WE