Sony CMT-DH5BT Mode D'emploi page 84

Masquer les pouces Voir aussi pour CMT-DH5BT:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Play does not start from the first
track.
 Set the play mode to Normal Play
mode.
Files cannot be played back.
 USB storage media formatted with file
systems other than FAT16 or FAT32 are
unsupported.*
 If you use partitioned USB storage
media, only files on the first partition
can be played.
 Files that are encrypted or protected by
passwords, etc. cannot be played back.
* This system supports FAT16 and FAT32, but
some USB storage media may not support all
of these FAT. For details, see the operation
manual of each USB storage media or
contact the manufacturer.
Picture
There is no picture.
 Press FUNCTION +/
to select "DVD" (or press DVD 
on the unit).
 Check that the system is connected
securely.
 The video cord is damaged. Replace it
with a new one.
 Make sure you connect the unit to the
video input jack of your TV (page 20).
 Make sure you turn on the TV and
operate the TV correctly.
 Press PROGRESSIVE
select "INTERLACE" if you connect
your TV to the unit's COMPONENT
VIDEO OUT jacks and your TV
cannot accept progressive signal.

GB
repeatedly
repeatedly to
 You have set to progressive format but
your TV cannot accept the signal in
progressive format. In this case, set to
interlace format (the default setting)
(page 21).
 Even if your TV is compatible with
progressive format (525p/625p)
signals, the image may be affected
when you set to progressive format. In
this case, set to interlace format (the
default setting) (page 21).
 Make sure you select the video input
on the TV so that you can view the
pictures from the system.
 Make sure you connect the unit and
your TV using only the supplied video
cord.
Picture noise appears.
 Clean the disc.
 If video signal from your system has to
go through your VCR to your TV, the
copy-protection applied to some DVD
VIDEO programs could affect the
picture quality. If you still experience
problems after checking your
connections, connect your unit directly
to your TV's S Video input (page 20).
 Keep the speaker cords away from the
antennas.
 When you connect your TV to the
COMPONENT VIDEO OUT jacks
and play back video-based software
in progressive signal format, some
sections of the image may appear
unnatural due to the conversion
process.

Publicité

Chapitres

Table des Matières
loading

Table des Matières