Sony CMT-DH5BT Mode D'emploi page 54

GRAPHICS: A preset picture stored in
the system appears in the background.
BLUE: The background color is blue.
BLACK: The background color is black.
BLACK LEVEL
Select the black level (setup level) for the
video signals output from the video jacks
other than COMPONENT VIDEO OUT
jacks.
ON: Standard level
OFF: Lower the standard black level. Use
this when the picture becomes too white.
BLACK LEVEL (COMPONENT OUT)
Select the black level (setup level)
for the video signals output from the
COMPONENT VIDEO OUT jacks.
You cannot select "BLACK LEVEL
(COMPONENT OUT)" when the system
outputs progressive signal.
OFF: Standard level
ON: Raise the standard black level. Use
this when the picture becomes too black.
: OUTPUT
Change this setting to watch 4:3
aspect ratio progressive signals. If
you can change the aspect ratio on
your progressive format (525p/625p)
compatible TV, change the setting on
your TV.
FULL: Select this when you can change
the aspect ratio on your TV.

GB
)
NORMAL: Select this when you cannot
change the aspect ratio on your TV.
Shows a 16:9 aspect ratio signal with
black bands on left and right sides of the
image.
16:9 aspect ratio TV
The default setting varies depending on the
1)
country or region.
16:9
4:3 LETTER BOX
4:3 PAN SCAN
Depending on the DVD VIDEO, "4:3
2)
LETTER BOX" may be selected automatically
instead of "4:3 PAN SCAN" or vice versa.
This setting is effective only when
3)
 you set "TV TYPE" in "SCREEN SETUP"
to "16:9. "
 "P AUTO" or "P VIDEO" is selected
(page 21).