Handling - Transport; Technical Specifications; Check Before Starting - Dimas FS 350 C-03 Manuel D'utilisation

1 Use
• Use : wet sawing new and old concrete and
asphal
• Tools : Diamond Blades - water cooled and dry -
Ø 350 mm - bore 25.4 mm
(Information from your usual supplier).
• Option : Ø 400 mm - 25.4 mm bore.
2

Technical specifications

• Depths of cut : 125 mm
• N o m i n a l w e i g h t (empty) : 89 kg to 93 kg
(depending on model)
• Operating weight : 119 to 126 kg
• Dimensions (L x W x H) : 1150 x 600 x 930 mm
• Blade shaft RPM : 2.950
POWER
MODEL
LEVEL
Lwa (dB)
EN ISO 3744
HONDA GX390 106
ROBIN EH 34
106
DL / SH
4 KW 400 V 99
3 Description of the machine [
Handle
1
Lowering lever
2
Graduated scale
3
Water intake tap
4
Service spanner
5
Engine
6
Disk casing
7
Front guide
8
Lifting ring
9
Belt cover
10
Engine oil drain
11
Motor voltage screw
12
Tank
13
Motor stop
14
Circuit breaker
15
Connector
16
RCCB
17
PRESSURE VIBRATION
LEVEL LEVEL
Lpa (dB) G
EN ISO 4871 ENV 25349
93 1.01
93 1.01
75 0.4
1]
FIG.
4

Handling - Transport

Switch off the disk prior to moving the
machine on jobsite.
Remove the disk prior to hoisting,
loading, unloading and transporting the
machine on jobsite.
Height of the handle-bar adjustable by pivoting
• To position the floorsaw on the site, simply push
it. It will move easily on its four wheels without
starting the engine.
• Lock in the high position by means of the lever
(E), placing the foot on the chassis to ease lifting
[ 2].
FIG.
• For transporting by vehicle or by any kind of
lifting gear, there is a factory-fitted hoisting point
on the machine.
5

Check before starting

Please read the instructions for use
prior to operating the machine for
the first time.
Motor off.
The working
completely cleared, well lit and all
safety hazards removed (no water or
dangerous objects in the vicinity)
The
protective clothing appropriate
to the work he is doing. We
recommend that this includes
both eye and ear protection
The use of ear protection is
mandatory.
Any persons not involved in the work
should leave the working area
Use only blades marked with a
maximum operating speed greater
than blade shaft speed
area must
operator must wear
be
21