Specifying The Device Number To Pair It - Pioneer SGY-PM900H90 Mode D'emploi

EN
Pairing the Pedaling Monitor Sensor

Specifying the Device Number to Pair it

To specify the device number of the sensor, do the following procedure before searching for the sensor.
1
Check [Specified Search] in the sensor's pairing menu.
[Device Number] appears on the pairing menu.
2
Tap [Device Number].
3
Enter the device number and tap [Done].
•
See page 35 regarding the device numbers of the transmitters.
•
When you input the device number, make sure that the number you specify is displayed in [Device Number] on the sensor's information
confirmation screen.
34