Pile Bouton; Removing The Coin-Cell Battery; Installation De La Pile Bouton - Dell OptiPlex 3080 Micro Instructions De Service

Pile bouton

Removing the coin-cell battery

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the front bezel.
NOTE: Removing the coin-cell battery resets the BIOS setup program settings to default. It is recommended that you note
the BIOS setup program settings before removing the coin-cell battery.
About this task
The following images indicate the location of the coin-cell battery and provide a visual representation of the removal procedure.
Steps
1. Using a plastic scribe, gently pry the coin-cell battery out of the battery socket on the system board.
2. Remove the coin-cell battery out of the system.

Installation de la pile bouton

Prérequis
Si vous remplacez un composant, retirez le composant existant avant d'exécuter la procédure d'installation.
À propos de cette tâche
L'image suivante indique l'emplacement de la pile bouton et fournit une représentation visuelle de la procédure d'installation.
40 Démontage et remontage
before working inside your computer.