Installing The M.2 2280 Pcie Solid-State Drive - Dell OptiPlex 3080 Micro Instructions De Service

Steps
1. Remove the screw (M2x3.5) that secures the solid-state drive to the system board.
2. Slide and lift the solid-state drive off the system board.

Installing the M.2 2280 PCIe solid-state drive

Prerequisites
Si vous remplacez un composant, retirez le composant existant avant d'exécuter la procédure d'installation.
About this task
The following image indicates the location of the solid-state drive and provides a visual representation of the installation
procedure.
Démontage et remontage 29