Setting Up The Control Box; Guarantee; Disposal - Dometic WAECO AMP100 Instructions De Montage Et De Service

AMP100
7

Setting up the control box

AMP100 must be adapted to certain connection possibilites via two small dip switches.
No. in fig. 5,
page 6
1
2
➤
Set the dip switches as desired based on the table.
8

Guarantee

The statutory warranty period applies. If the product is defective, please contact your re-
tailer or the manufacturer's branch in your country (see the back of the instruction manual
for the addresses).
For repair and guarantee processing, please include the following documents when you
send in the device:
A copy of the receipt with purchasing date
A reason for the claim or description of the fault
9

Disposal

➤
Place the packaging material in the appropriate recycling waste bins wherever
possible.
M
If you wish to finally dispose of the product, ask your local recycling centre or
specialist dealer for details about how to do this in accordance with the applica-
ble disposal regulations.
Designation
DIP switch 1 is used to select the connected camera:
CAM33: Switch at ON position
CAM80: Switch at OFF position
DIP switch 1 is used to set image mirroring on camera CAM80:
In default mode as a rear view camera, this switch must be set to
ON. The image is mirrored and then functions as if you were look-
ing into the rear-view mirror.
To deactivate image mirroring, the switch must be in the OFF po-
sition.
When camera CAM33 is used, the switch must be in the OFF position.
Setting up the control box
23