Intended Use; Control Elements; Can Bus Interface - Dometic MagicSpeed CBI150 Instructions De Montage Et De Service

CBI150
4

Intended use

MagicSpeed CBI150 (ref. no. 9600000428) is an interface for converting digital CAN bus signals
into analogue signals. CBI150 decodes the digital signals from the on-board vehicle electronics
and transmits analogue signals to the outputs.
MagicSpeed CBI150 is designed for installation in passenger vehicles with a CAN bus port.
5

Control elements

See fig. 3
No. Designation
1 Status LED
2 10-pin socket
3 Software version for the module
6

CAN bus interface

See fig. 4
No. Designation
1 Pink cable: "Handbrake applied" signal
2 Brown cable: "Reverse gear engaged" signal
3 Violet cable: "Ignition switched on" signal
4 Green cable: Speedometer signal
5 Yellow cable: Engine speed signal
6 Orange cable: "Clutch applied" signal
7 White cable: Connection to CAN High
8 Blue cable: Connection to CAN Low
9 Black cable: Connection to earth
10 Red cable: Connection to a cable which is protected with max. 5 A
EN
Intended use
5