Safety And Installation Instructions; Scope Of Delivery - Dometic MagicSpeed CBI150 Instructions De Montage Et De Service

Safety and installation instructions

2 Safety and installation instructions
See fig. 1
The following texts are only a supplement to the illustrations on the supplementary
sheet. They do not contain the full installation and operating instructions. Please
observe the illustrations on the supplementary sheet.
Please observe the prescribed safety instructions and stipulations from the vehicle
manufacturer and service workshops.
The manufacturer accepts no liability for damage in the following cases:
• Damage to the product resulting from mechanical influences
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in the operating manual
A
• Observe the applicable legal regulations.
• Install the system in the vehicle interior.
• Secure the system in such a way that it cannot become loose under any circum-
stances (sudden braking, accidents) and cause injuries to the occupants of the
vehicle.
• Do not fit the system where an airbag may open. This could cause injury if the airbag
deploys.
• Maintain a sufficient interval to intense sources of heat.
• Do not expose the control electronics to moisture.
• Connecting the device to other operating voltages than those specified may cause
hazardous situations.
• After a data protocol update by the vehicle manufacturer, the device may no longer
function according to the instructions.
3

Scope of delivery

See fig. 2
No. Quantity
1 1
2 1
– 1
4
Designation
CAN bus interface
Connection cable
Vehicle list
Ref. no.
9600000428
CBI150
EN