Table des Matières
Publicité
Guide to the washer
Operating panel
a
a Display*
1
Hot Wash
2
Cottons
3
Cottons Intensive
i
After turning the machine on, the display briefly
shows a welcome screen and switches to the
program list. The last started program is highlighted.
b Control keys
The control keys have different functions depending
on the machine status. The functions are shown in the
display above each button.
If programmed to "Button allocation direct", the first 6
programs from the program list can be selected
directly with the control keys 1 to 6.
c "START" button
The circle illumination flashes if a selected program
can be started. To start a program press the "START"
button. Once a program has started the START
button can be pressed to show the original display.
* Contents in the display will vary with
program offering.
8
b
194 °F
140 °F
140 °F
FC
A
c d
e
d Optical interface PC
The optical interface on the machine's control panel
provides the connection point for data transfer
between the machine's controls and a PC.
e Jog shuttle
Turn the jog shuttle to display selections and input
fields.
Press the jog shuttle to confirm display selections or
changes.
f Card reader
For card operation. Washing programs can be
uploaded and downloaded on the program card. The
programs on the card can be used to operate the
washer.
g I On button
Turns the machine on.
h 0 Off button
Turns the machine off.
i Emergency Stop button
Only use in case of an emergency.
^ Press the red button to turn the machine off. After
clearing the danger, turn the button clockwise to
unlock it.
^ Press "START" to continue the interrupted program.
f g h i
Publicité
Chapitres
Table des Matières
