Table des Matières
Publicité
Installation Instructions
Connecting the dispensing pumps
The connecting terminal for 4 time controlled
dispensing pumps is located behind the cover next to
the electrical connection. See the supplied wiring
diagram.
Steam connection
The steam connection must only be connected by a
certified installer. For more information see the
enclosed installation plan and the installation manual.
Steam solenoid valve, dirt filter and steam shutoff
valve must be installed on site.
The steam valve and the condensate trap are
available from your Miele dealer or from Miele.
,
Do not attempt to repair a gas-heated dryer
yourself! Repairs must be carried out by a
qualified technician. Contact Miele Technical
Service or an authorized dealer.
Once the appliance has been set up and
connected, replace all the housing parts that were
removed.
38
Publicité
Chapitres
Table des Matières
