Table des Matières
Publicité
Optional modules
Liquid dispensers
Dispenser pump
a c b
a Hose connection socket (suction side)
b Hose connection socket (pressure side)
c Leakage outlet (in case of damaged hose)
d Suction inlet
e Level checker for empty indicator. The pump and
the machine will switch off automatically if a liquid
agent container is empty.
Dispensing system fault
ö
Fill dispenser 1
Press the start button
i
The machine will warn you that the liquid dispensing
agent level is insufficient.
The program can be restarted after refilling the liquid
agent container by pressing the START button.
20
Suction pipe
e
d
f
To deselect the liquid dispensing system
1
Cottons
2
Cottons universal
3
Cottons intensive
ä
i
You can switch off the liquid dispensing system
manually before starting a program by setting the ä
"Dispensing" system to off.
Once the program has started dispensing will not
take place via the dispenser pumps and the following
will appear in the display:
1
Cottons
90 °C
Main wash
Rinses
m
k
+i
Dispensing amount
Please follow the manufacturer's instructions on the
packaging for dispensing requirements.
,
This is particularly important when using a
combination of cleaning agents and special
application products. Only use the product for the
application described by the manufacturer, to
avoid any material damage or the occurrence of
strong chemical reactions. Confirm with the
detergent manufacturer that their product can be
used in combination with another type of product.
Liquid agents should be allowed to settle to room
temperature before use to ensure that their viscosity
level is correct and thus ensure the correct amount is
dispensed.
90 °C
60 °C
60 °C
FC
A
10.0/10.0 kg ä
1000 rpm
m
A
Publicité
Chapitres
Table des Matières
