End Of Program - Miele professional PW 6107 Mode D'emploi

Use
Block 2: Rinse 2
Step: Wash time 1
Actual water level: 22 in
Required water level 60 in
Actual temperature 95 °F
Rqurd. temp.: 140 °F
1 Hot Wash
rpm: 40 rpm
Rhythm 12 / 3
^ Press A "Back" to return to the program.

End of program

At the end of the program, once the drum is
stationary and no water is in the machine the display
shows (for example):
1 Hot Wash
Program end
Door can be opened.
m
At the same time a tone will sound for a short time to
signal the program end.
^ Pull the door handle to open the drum door.
Important: If the door cannot be opened, press
against the door handle then pull again.
Do not use force!
^ Remove the laundry.
If the program was stopped with water in the machine
or while spinning, the following is displayed:
1 Hot Wash
Program end - Water in the drum
q m
or
1 Hot Wash
Program end - Drum rotates
m
14
e
e
-
A
FC A
FC A
FC A
,
The drum door is locked.
Do not use force!
^ Press the q "Drain" button or select the Drain Extra
program and press "START".
^ At the end of the program open the door.
Leave the drum door open to air dry the interior.
^ Turn the machine off with the 0 "Off" button.
^ Shut off the power supply (on-site).