Bosch DLE 150 Connect PROFESSIONAL Instructions D'utilisation page 40

Adding/Subtracting Measured Values
Storing/Adding Measured Values
For example, if an area value is stored in the memory and the current
measurement is a volume value, the addition cannot be performed. In the
display, the "ERROR" message blinks briefly.
Subtracting Measured Values
By pressing the
deducted from the value stored. In the display, "M–" appears briefly and
then "M".
If a value is already stored in memory, the new value is subtracted from
the contents of memory, however, only when the measuring units agree
(see Storing/Adding Measured Values).
Displaying Stored Values
Clearing the Memory
To clear the memory contents, first press the
recall until "M=" appears in the display. Then press the clear
ton 12; the "M" no longer appears in the display.
List of the Last 20 Measured Results
Displaying the List
The measured values displayed can still be entered into memory by press-
ing the button 16 or the
Clearing the List
The list of the last 20 measurement results can be cleared when first the
button 14 for memory recall is pressed until the
counter of the measurements appear. Then press the clear
12; in the display,
1 609 929 F53 • (04.07) T
By pressing the
the bottom of the display – either a length,
area or volume value depending on the cur-
rent measuring function – is stored in memory.
In the display, "M+" appears briefly and then
"M".
If a value is already present in the memory, the
new value is added to the memory contents,
however, only when the units of the measure-
ments are in agreement.
button 15, the value at the bottom of the display is
By pressing the button for memory recall
14, the value stored in the memory is
displayed. In the display, the memory symbol
"M=" appears.
When the memory content "M=" is shown in
the display, it can be doubled by pressing the
button 16 or set to zero by pressing the
button 15.
By repeated pressing of the memory recall
button
are displayed in reverse order (the last meas-
ured value first). In the display, the symbol
appears. The counter on the right next to the
symbol
urements.
no longer appears.
English–16
button 16, the value at
button 14 for memory
14, the last 20 measured results
shows the numbering of the meas-
button 15.
but-
symbol and the
button