Bosch DLE 150 Connect PROFESSIONAL Instructions D'utilisation page 34

Wireless Connection
During the start of the "BOSCH DLE 150" software, the wireless connec-
tion is established (see Starting the "BOSCH DLE 150" Software).
The software checks the status of the wireless connection regularly:
Wireless Connection Intact
Disconnecting the Wireless Connection by the DLE 150 Connect
The wireless connection is interrupted when the DLE 150 Connect is lo-
cated out of range, when it is switched off or it switches itself off automat-
ically.
After an interruption, the software of the PC or PDA attempts to re-estab-
lish the connection for some minutes ("Connect the DLE 150 Connect" in-
dication). In an application software, the status symbol
header during this time.
If the DLE 150 Connect is switched on again or returned to within range
during the time that the connecting process is running, the wireless con-
nection is then automatically re-established.
Disconnecting the Wireless Connection by the PC or PDA
When the software on the PC or PDA is terminated or it is located out of
range, the wireless connection indication d on the DLE 150 Connect then
goes off after a short time.
To re-establish the wireless connection, restart the "BOSCH DLE 150"
software on the PC or PDA.
Changing the Connection to Another DLE 150 Connect
1 609 929 F53 • (04.07) T
When the connection is intact, the wireless
connection indication d appears on the dis-
play of the DLE 150 Connect and the status
indication shown here in the "BOSCH DLE
150" software. On the PC or PDA, the sta-
tus symbol
with other applications.
If the connection cannot be re-established
within some minutes, the status symbol of
the DLE 150 Connect is no longer displayed.
In the "BOSCH DLE 150" software, the dis-
play shown here appears.
To re-establish the connection to the same
DLE 150 Connect with which work was in
progress before the interruption, click on the
"Repeat" indicator. The connection will be
re-established.
To start a search for all DLE 150 Connects
within range, click on "New Search". All units
found will be listed. For the further proce-
dure, see Starting the "BOSCH DLE 150"
Software.
To close the software, click on "End".
To establish connection to another DLE 150
Connect, click on the "New Search" menu
item in the "File" menu on the menu bar. All
units found will be listed. For the further pro-
cedure, see Starting the "BOSCH DLE 150"
Software.
English–10
is also visible while working
is shown in the