Features; Assembly; Operation - Ryobi P747 Manuel D'utilisation

PRODUCT SPECIFICATIONS
Motor .................................................................. 18 Volt DC
High Pressure Hose Length ....................................... 24 in.
Low Pressure Hose Length ........................................ 12 in.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
or with damaged or missing parts could result in serious
personal injury.
If any parts are damaged or missing, please call 1-800-525-2579 for assistance.
WARNING:
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a second
is sufficient to inflict serious injury.
WARNING:
Always remove battery pack from the tool when you are
assembling parts, making adjustments, cleaning, or when
not in use. Removing battery pack will prevent accidental
starting that could cause serious personal injury.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Failure to do so could result in
objects being thrown into your eyes resulting in possible
serious injury.
WARNING:
Do not use any attachments or accessories not recom-
mended by the manufacturer of this tool. The use of at-
tachments or accessories not recommended can result
in serious personal injury.

FEATURES

Gauges ...............................................Digital Readout (PSI)
Maximum Pressure ..................................................150 PSI

ASSEMBLY

WARNING:
Do not attempt to modify this product or create acces-
sories or attachments not recommended for use with this
product. Any such alteration or modification is misuse
and could result in a hazardous condition leading to pos-
sible serious personal injury.

OPERATION

WARNING:
Do not leave items to be inflated unattended while infla-
tor is in use. These items can burst and could cause
serious injury.
WARNING:
The pressure gauge on this unit is not calibrated. Tire
pressure must be checked using a reliable measuring
device before driving a vehicle with tires inflated with this
unit. Driving a vehicle with improperly inflated tires could
result in serious injury.
NOTICE:
The inflator is not designed for continuous use. For every
ten minutes of inflator use, ten minutes of cool down time
is required.
NOTICE:
The inflator is capable of inflating to 150 PSI. To avoid
over inflation, carefully follow instructions on items to be
inflated. To avoid product damage, never exceed recom-
mended pressures.
5 — English