How To Assemble And Use; Technical Data - Reliable 2100IR Guide D'utilisation

HOW TO ASSEMBLE AND USE

1. Remove the steam iron from its packing and make sure all packing parts
have been taken off (including the protective bags).
2. It is recommended to put the iron on the iron pad, (supplied) as the pad will
withstand the temperature of the iron
3. Connect the 4-pin male electrical plug (3) to the female plug on the
steam generator.
4. Connect the steam hose using the quick connect attachment (4).
5. Set the temperature regulation knob (2) to desired temperature.
6. Wait for the iron plate to get hot (it takes about 5 minutes).
7. The steam iron is now ready for use.
8. Push the steam button (1) to release steam.
9. Please wait 30 minutes for the steam iron to cool down before storing it away.
DESCRIPTION OF THE IRON
1. Steam button
2. Temperature regulation knob
3. Male electrical plug
4. Quick release of steam hose
5. Iron plate

TECHNICAL DATA:

Heating element: 800W – 120V-220V
Adjustable thermostat: Set at 60°C – 215°C
Safety thermal fuse: Set at 275°
04