After Ironing; How To Use; General Information - Reliable VERVE 100SR Guide D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

IRONING WITH CONTINUOUS STEAM
The Rotary Press steams even if the foot pedal is not pressed and you can select between
the three steam settings: Minimum, Medium and Maximum, to match the amount of steam
to the garment and thus obtain the best result.
Ironing with continuous steam is suitable for ironing wool pullovers or velvet garments that
are not to be pressed. Instead, these are smoothed by passing them over the heating shoe
and the continuous steam with the ironing roller in the raised position.
Immediately after the Power Switch is switched on, the green LED Power On illuminates.
Select the required temperature setting Wool, Cotton or Linen for ironing and wait until the
corresponding red LED illuminates steadily.
The heating shoe temperature is automatically reheated during ironing. If a new tempera-
ture setting is selected (including a lower setting), the corresponding LED flashes until the
selected heating shoe temperature is reached. (Illustration 1)
When the Continuous Steam button is pressed, the blue LED illuminates. At the same time,
the medium blue steam setting flashes until the steam generator has heated up. The LED
then remains illuminated and steam generation begins. Select one of the three steam set-
tings. (Illustration 6)

AFTER IRONING

Press the Power Switch. The green LED goes out. Now unplug from the socket.
Do not fold the Rotary Press until it has fully cooled down!

HOW TO USE

This chapter contains step-by-step instructions on how to iron various types of garments
and home décor items with your Reliable Rotary Press.

GENERAL INFORMATION

Before ironing with your Rotary Press, check the care labels of your items for any specific
care instructions.
Place the item in position so that any zippers, buttons, hooks, etc, face upward towards the
roller.
It is possible to iron without steam, with demand steam or with continuous steam.
For some materials such wool sweaters or fabrics with pile (such as velvet or corduroy),
the use of the iron roller for pressing or ironing is not recommended. Instead, the garment
should be drawn over the steam slot in Continuous Steam mode.
The large ironing area also enables bed linens and table cloths to be ironed without dif-
ficulty. The large collecting table holds the garments flat after ironing.
After ironing, lay the garments together and allow them to cool.
15

Publicité

Table des Matières
loading

Table des Matières