Technibel Climatisation SPA 250 X5 TA Série Mode D'emploi page 8

1 HR. TIMER button
MODE selector button
FLAP button
FAN SPEED
selector button
NOTE
Transmitter
Sensor
Display
NIGHT SETBACK button
TEMP. setting buttons
ON/OFF operation button
Timer setting
buttons
Program button
8
Remote Control Unit
Sensor
AIR CONDITIONER
1 HR.
Display
A
1HR.
TIMER
MODE
FLAP
FAN SPEED
SELECT
The illustration above pictures the remote control unit after the cover
has been lowered and removed.
When you press the buttons on the remote control unit, the
appears in the display to transmit the setting changes to the receiver in
the air conditioner.
A temperature sensor inside the remote control unit senses the room
temperature.
Information on the operating conditions is displayed while the remote
control unit is switched on. If the unit is turned off, only the mode that
was set previously is still displayed.
For details, see ''Night Setback Mode''. When you press this button in
the COOL mode, the
control unit will automatically adjust the set temperature to save energy.
Press the button to increase the set temperature.
Press the button to reduce the set temperature.
This button is for turning the air conditioner on and off.
First, press the Program button to select the mode you want.
Each time you press the ''HH'' button, the hours advance by one.
Each time you press the ''MM'' button, the minutes advance by one.
For details, see ''Setting the Timer''.
Press this button to select the mode you want to program.
Transmitter
SET TEMP
C
ON OFF
TEMP.
ON I /OFF
NIGHT
OFF ON
SETBACK
CLOCK
HH TIMER
SELECT
MM
A/C
ACL
TIME SET
SENSOR
BATTERIES
mark appears in the display, and the remote
(Cover closed)
TEMP. setting buttons
ON/OFF operation button
NIGHT SETBACK button
Program button
TIMER SELECT button
Timer setting buttons
A/C SENSOR button
ACL button
Battery compartment
(Pull off the cover to expose the
batteries.)
mark