Operation With The Remote Control Unit; Operation - Technibel Climatisation SPA 250 X5 TA Série Mode D'emploi

1. Operation

NOTE
12
Operation with the Remote
Control Unit
STEP 1
STEP 5
STEP 4
Check that the circuit breaker on the power panel is turned on and that
the operation selector of the indoor unit is in the ON position.
Press the setting buttons as described below and change the settings as
desired.
STEP 1 Set the MODE selector button to COOL.
STEP 2 To start the air conditioner, press the ON/OFF
operation button.
STEP 3 Press the TEMP. setting buttons to change the
temperature setting to the desired temperature.
STEP 4 Set the FAN SPEED selector button to the setting
you want.
If the fan speed is set to
NOTE
speed switches automatically, according to the
difference between the actual room temperature
and the temperature setting.
STEP 5 Press the FLAP button and set the airflow
direction as desired.
(Refer to ''Adjusting the Airflow Direction'' on
page 14.)
To stop the air conditioner, press the ON/OFF operation button again.
AIR CONDITIONER
SET TEMP
1 HR.
C
A
1HR.
TIMER TEMP.
ON I /OFF
NIGHT
OFF ON
SETBACK
MODE
CLOCK
HH TIMER
FLAP
SELECT
FAN SPEED
MM
A/C
ACL
TIME SET
SELECT
SENSOR
BATTERIES
For cooling operation
Adjustable temperature range:
STEP 3
STEP 2
→
30 °C max.
16 °C min.
(Automatic), the fan