Connecting To Audio Equipment - Digital - Philips SACD1000 Mode D'emploi

Connecting to an amplifier/receiver
equipped with Dolby Pro Logic
For an amplifier/receiver with Dolby Surround, you can
connect your SACD player in the same way as described
for Dolby Pro Logic.
Dolby Pro Logic sound
1 Connect the audio Left and Right outputs for Front
speaker connection (1) to the corresponding inputs
on the Dolby Pro Logic Audio/Video
amplifier/receiver using the audio cable supplied.
2 Set Analogue Output to Dolby Surround in the
'Personal Preferences' menu.
If your amplifier/receiver is equipped with a
Dolby Digital decoder
Connect the player as described in the section
'Connecting to an Audio/(Video) receiver with multi-
channel decoder'.
If you connect the player to a TV equipped with a
Dolby Pro Logic decoder
Connect the player to the TV as described in the
section 'Connecting to a TV'.
Connecting to audio equipment -
digital
The digital output of the SACD1000 does not provide
PCM (Pulse Code Modulation) signals. If your
amplifer/receiver can only decode PCM and not multi-
channel signals such as Dolby Digital, do not connect
your SACD player using the digital input. This could
damage your amplifier and/or speakers.
Connecting to an Audio/(Video) receiver
with multi-channel decoder (Dolby Digital,
MPEG 2 and DTS)
Digital Multi-channel sound (not for SACD)
For this you need a multi-channel A/V receiver that
supports one or more of the DVD audio formats
supported by your SACD player (MPEG 2, Dolby Digital
and DTS). Check the receiver manual and the logos on
the front of the receiver.
1 Connect the player's digital audio output (optical 4
or coaxial 5) to the corresponding input on the
receiver using the digital audio cable (coaxial) is
supplied. Optical is optional.
AMPLIFIER
4 5
MAINS
RIGHT LEFT
VOLTAGE SELECTOR
220-240V 100-120V
FILTER
1 2 3
GND
STEREO OUT
DIGITAL AUDIO OUT
Dolby Digital/
DTS/MPEG only
R L (CVBS)
OPT OUT DIG OUT AUDIO VIDEO OUT
Notes:
- If the audio format of the digital output does not match the
capabilities of your receiver, the receiver will produce a
strong, distorted sound. The audio format of the DVD disc in
play is displayed in the Status Window when changing the
audio format.
- 6 Channel Digital Surround Sound via digital connection can
only be obtained if your receiver is equipped with a Digital
Multi-channel decoder. If your receiver does not contain a
decoder, you can make the analogue connections as
described in the section'Connecting to a Multi-channel
Audio/(Video) receiver with 6 connectors' to obtain 6 Channel
Digital Surround Sound.
- SACD Multi-channel sound cannot be obtained via digital
connection.
MULTICHANNEL AUDIO OUT
RIGHT SURR. LEFT SURR. SUBW CENTER
1
2
( Y/C )
C C Y
R B S-VIDEO
PREPARATION 19