Unpacking; Placement - Philips SACD1000 Mode D'emploi

Unpacking

First check and identify the contents of your SACD-
player package, as listed below:
- SACD player
- Remote Control with batteries
- 2-core power cord
- Audio cable (4x)
- Digital coaxial cable
- Video cable
- YC C cable
B R
- Instructions for use
If any item is damaged or missing, please inform your
supplier immediately.
Save the packaging materials; you may need them to
transport your player in the future.
12 INTRODUCTION

Placement

Place the player on a firm, flat surface.
Keep away from domestic heating equipment and
direct sunlight.
In a cabinet, allow about 2 inches of free space all
around the player for adequate ventilation.
If the SACD player cannot read SACDs/CDs/DVDs
correctly, use a commonly-available cleaning
CD/DVD to clean the lens before taking the SACD-
player to be repaired. Other cleaning methods may
destroy the lens. Always keep the tray closed to
avoid dust on the lens.
When it is moved from a cold to a warm
environment, allow the SACD player to acclimatize
for at least 2 hours in order to avoid damage. When
suddenly placed in a warm environment, the lens
may cloud over. Playing an SACD/CD/DVD will not
be possible then. Wait until the moisture
evaporates.