Weller WCB 1 Manuel D'utilisation page 16

No blinking cursor in ready mode: Error in connection cable (5) (defective or not connec-
ted)
3.2 Battery replacement
Push open cover to battery compartment in direction of arrow (open). Insert batteries as
shown in battery compartment. Shut housing.
4. Technical data
WCB 1: Battery 4 x 1.5V Type AA/mignon
WCB 2: Battery 4 x 1.5V Type AA/mignon
Network adapter 9V DC 100 mA (connection (6))
3.5 mm jack connection, neutral contact (inner conductor) +
5. Accessories (WCB 2 only)
005 31 190 99 Temperature sensor for jacketed thermoelement Type K ø 0.5 mm
005 31 181 99 Interface cable
005 31 184 99 Network adapter (230V/50 Hz)
6. Scope of supply
Calibration box
Batteries 4 x 1.5V
Operating instructions
15