Using The Unit Safely - Roland Mobile AC Mode D'emploi

About WARNING and
Used for instructions intended to alert the
user to the risk of death or severe injury
should the unit be used improperly.
Used for instructions intended to alert the
user to the risk of injury or material
damage should the unit be used
improperly.
* Material damage refers to damage or
other adverse effects caused with
respect to the home and all its
furnishings, as well to domestic animals
or pets.
WARNING
Do not disassemble or modify by yourself
Do not open (or modify in any way) the unit or
its AC adaptor.
Do not repair or replace parts by yourself
Do not attempt to repair the unit, or replace
parts within it (except when this manual
provides specific instructions directing you to do
so). Refer all servicing to your retailer, the nearest
Roland Service Center, or an authorized Roland
distributor, as listed on the "Information" page.
Do not use or store in the following types of
locations
• Subject to temperature extremes (e.g., direct
sunlight in an enclosed vehicle, near a heating
duct, on top of heat-generating equipment);
or are
• Damp (e.g., baths, washrooms, on wet floors);
or are
• Exposed to steam or smoke; or are
• Subject to salt exposure; or are
• Humid; or are
• Exposed to rain; or are
• Dusty or sandy; or are
• Subject to high levels of vibration and
shakiness.

USING THE UNIT SAFELY

CAUTION Notices
ALWAYS OBSERVE THE FOLLOWING
About the Symbols
The symbol alerts the user to important instructions or
warnings.The specific meaning of the symbol is
determined by the design contained within the triangle. In
the case of the symbol at left, it is used for general
cautions, warnings, or alerts to danger.
The symbol alerts the user to items that must never be
carried out (are forbidden). The specific thing that must
not be done is indicated by the design contained within
the circle. In the case of the symbol at left, it means that
the unit must never be disassembled.
The symbol alerts the user to things that must be
carried out. The specific thing that must be done is
indicated by the design contained within the circle. In the
case of the symbol at left, it means that the power-cord
plug must be unplugged from the outlet.
WARNING
Do not place in an unstable location
Make sure you always have the unit placed so
it is level and sure to remain stable. Never place
it on stands that could wobble, or on inclined
surfaces.
Use only the specified AC adaptor and the correct
voltage
Use only the specified AC adaptor (p. 10), and
make sure the line voltage at the installation
matches the input voltage specified on the AC
adaptor's body. Other AC adaptors may use a
different polarity, or be designed for a different
voltage, so their use could result in damage,
malfunction, or electric shock.
Use only the included power cord
Use only the attached power-supply cord. Also,
the supplied power cord must not be used with
any other device.
Do not bend the power cord or place heavy objects
on it
Do not excessively twist or bend the power
cord, nor place heavy objects on it. Doing so can
damage the cord, producing severed elements
and short circuits. Damaged cords are fire and
shock hazards!
11