Technical Data; Ambient Conditions - Bosch REXROTH 3 842 998 350 Mode D'emploi

26/30 Bosch Rexroth AG
Troubleshooting procedure
1. Make sure that all plugs are properly connected.
2. Check all cables for crush and shear points.
3. Exchange the control unit (initialization required after an exchange
 24).
4. Exchange the lifting module (initialization required after an exchange
 24).
If you are unable to remedy the error, please get in touch with one of the
contact addresses listed at www.boschrexroth.com.
15

Technical Data

• For dimensions, see the Height-adjustable workstation sales catalog,
3 842 540 714
• Suitable for use in ESD sensitive areas. For more information, please
contact your Rexroth representative.
• Noise emissions: < 70 dB (A)
15.1

Ambient conditions

• The height-adjustable workstation has been designed for stationary use
in a location that is protected from the elements.
• Operating temperature
• Storage temperature
• Relative humidity
• Air pressure
• Load values are reduced by 15% when the system is set up in a location
that is > 1400 m
• Avoid molds, fungi, rodents, and other vermin.
• Do not install or operate near industrial systems with chemical
emissions.
• Do not install or operate near sandy or dusty sources.
• Do not install or operate in areas that are regularly jarred by high forces
caused by e.g. presses or heavy machinery.
• Resistant to many common media used in production such as water,
mineral oil, grease, and detergents. Contact your Rexroth representative
if you have any doubts about resistance to specifi c chemicals, e.g. test
oil, doped oils, aggressive detergents, solvents, or brake fl uid.
• Avoid long-term contact with acidic or basic reacting materials.
MPS | 3 842 542 071/2013-10
+5°C to +40°C
–5°C to +60°C with 20% reduced load
–25°C to +70°C
5% to 85%
> 84 kPa, appropriate height < 1400 m above
sea level.