Installing Movepower; Before Initial Use - Dometic MovePower MVP 360 Notice D'utilisation

MovePower MVP360
6

Installing MovePower

When selecting the installation location, observe the following instructions:
 The mounting frame must be installed horizontally.
 The installation location must be protected from moisture.
 The installation location may not be in an environment with flammable
materials.
 The installation location may not be dusty.
 The installation location must be well ventilated. A ventilation system must
be available for installations in small, enclosed spaces. The clearance
around the device must be at least 25 cm.
 The device must be installed on a level and sufficiently sturdy surface.
NOTICE!
A
Before drilling any holes, make sure that no electrical cables or oth-
er parts of the vehicle can be damaged by drilling, sawing and filing.
➤ Secure the IU0U automatic charger PerfectCharge IU812 on the mount-
ing frame using the fastening screws supplied.
➤ Select a suitable installation location in the caravan, such as a storage
box. Observe the information above.
➤ Secure the mounting frame with the fastening screws supplied.
7

Before initial use

NOTE
I
Only use the battery quick connections (fig. 1 6, page 2) provided
to connect the parking assistance to MovePower.
➤ Attach the battery quick connection to the connection cable for the parking
assistance (fig. 5, page 4).
✓ The connection cable for the parking assistance is ready for use.
EN
Installing MovePower
21