Signal Strength Indicator; Reset; Menu Of The Parent Unit; Navigating The Menu - Philips SCD570 Mode D'emploi

6.6 Signal strength indicator

6.6.1 In Smart Eco mode
Smart Eco mode is the standard operating mode.
In this mode, the strength of the DECT signal
depends on the distance between the baby unit
and the parent unit.
• If the signal strength indicator has 4 bars, the
connection between the baby unit and the
parent unit is excellent.
• If the signal strength indicator has 1 bar or no
bar at all, the signal from the baby unit is very
weak or not available. Take the parent unit
closer to the baby unit to get a better signal.
6.6.2 In Eco Max mode
In this mode the DECT signal from the baby unit
to the parent unit is switched off.
• The signal strength indicator has no bar at all
when the DECT signal is off, even when the
parent unit is within range of the baby unit.
• When the baby unit starts to transmit a
DECT signal because the baby is making a
sound, the display goes on and the signal
strength indicator shows the quality of the
connection between baby unit and parent
unit.
• For more information on the Eco Max mode,
see 'Eco Max mode' in chapter 'Menu of the
parent unit'.

6.7 Reset

This function allows you to reset the parent unit
and the baby unit to the factory default settings.
Switch off the unit.
1
Press and hold the - button.
2
Switch on the unit again while holding
3
the - button.
6.7.1 Default settings
Parent unit
• Language: English
• Loudspeaker volume: 3
• Microphone sensitivity: 3
• Night dim mode: off
• Temperature alert: off
14
• 'Temperature low' alert: 14°C (57°F)
• 'Temperature high' alert: 35°C (95°F)
• Temperature scale: Celsius
• Eco Max mode: off
• Feed timer: 02:00
• Feed timer: Stop
• Vibration alert: off
• Cry alert vibration: off
• Clock: hidden
Baby unit
• Loudspeaker volume: 4
• Nightlight: off
• Lullaby: off (lullaby 1 selected)
7 Menu of the parent
unit
All functions described in the following sections can
be operated through the menu of the parent unit.

7.1 Navigating the menu

D
Note:
Some menu functions only work when the baby
unit and the parent unit are linked.
Press the MENU button to open the menu.
1
The irst menu option appears on the
•
display.
Use the + button to go to the next option or
2
the - button to go to the previous option.