VBM Domobar Junior Digital Manuel D'instructions page 54

7.2,
FIRST START.
· Load water as described in paragraph "Water load".
· Press the line switch (1) which lights up and the water
heating is activated, the logo (A) appears on the display.
· Wait for the boiler water temperature to be reached,
indicated by the green LED (2) lighting up and the screen
(B) appearing on the display.
· Lift the lever (3) and hold it up until of the group (4)
comes water, indicating that the boiler is full of water,
and then lower the lever (3).
· Turn off the machine by pressing the main switch (1)
again.
7.3,
START.
· Press the line switch (1) which lights up and the water
heating is activated, the logo (A) appears on the display.
· Wait for the boiler water temperature to be reached,
indicated by the green LED (2) lighting up and the screen
(B) appearing on the display. At at this point, the machine
is ready to be used.
18
A
2
4
B
1
3