Connecting Your Hp Smart Wi-Fi Display To Your Computer With The Usb; Cable; Using Headphones Or Speakers With Your Hp Smart Wi-Fi Display - HP Smart Wi-Fi Display Manuel De L'utilisateur

Connecting your HP Smart Wi-Fi Display to
your Computer with the USB Cable
You can connect your HP Smart Wi-Fi Display to your computer with the mini-USB to
USB cable, as follows.
Ensure that the HP Smart Wi-Fi Display is correctly configured for PC connection
1.
by going to Setup > Local Settings > USB Mode, and setting it to PC. For
more information on this setting, see "Local Settings" on page 17.
Connect the mini-USB end of the cable to the mini-USB connector on the HP
2.
Smart Wi-Fi Display.
Connect the USB end of the USB cable to an available USB connector on your
3.
computer. The computer will recognize the HP Smart Wi-Fi Display and any
connected memory cards or USB flash memory drives and they will appear in the
My Computer directory on your computer. You can now copy and paste files
to or from these drives just like you would with any other external memory.
Using Headphones or Speakers with your
HP Smart Wi-Fi Display
To use headphones or external speakers, plug them into the headphone jack on the
right side of the HP Smart Wi-Fi Display. For the exact location of the headphone
jack, see "Right Side" on page 12. The internal speakers are disabled while the
headphone jack is in use.
38