Initial Frame Setup; Clock Info; Setup Wizard - HP Smart Wi-Fi Display Manuel De L'utilisateur

Initial Frame Setup

The following instructions are shown using the remote control unit. Some of these
functions can also be accessed via the control keys located on the back of the HP
Smart Wi-Fi Display.

Clock Info

The date and time are automatically set when your HP Smart Wi-Fi Display connects
to the Internet.
The time zone, and daylight savings options are derived from the ZIP Code that you
enter when setting up your www.hpframe.com account.
If you are not connected to a wireless network, you can also manually adjust the
time. See "Manually setting the date and time" on page 20 for more information.

Setup Wizard

The Setup Wizard helps you get your HP Smart Wi-Fi Display up and running
and will run automatically when the frame is powered on for the first time, or if the
frame has been reset to factory default settings. In this case, you can skip to step 2
below.
From the Setup menu, navigate to Setup Wizard and press the Select
1.
button.
The welcome screen appears, which will guide you through the setup procedure.
2.
Note: At any stage, press the Select button to go to the next screen.
The tutorial begins, and explains the buttons on the remote control. Follow the on-
3.
screen instructions to learn about the remote control buttons and their functions.
Follow the prompts to display the Network Setup screen.
4.
Use the Up or Down buttons to highlight your wireless network name (note that
5.
you may need to scroll down if more networks are available than can fit on the
screen), then press the Select button to select.
Note: If you are connecting to a non-broadcasting wireless network, then
choose Setup Hidden Network WEP, Setup Hidden Network WPA,
or Setup Hidden Network Open, depending on which security is used by
your network. If necessary, you will then be offered the chance to enter the
network SSID manually by using the remote control to move through the letters
on the virtual keyboard. If required, use the Mark button to cycle through the
virtual keyboards.
13