Photo Viewing Options; Printing A Photo - HP Smart Wi-Fi Display Manuel De L'utilisateur

Photo Viewing Options

There are two ways to choose photo viewing options:
Setup menu
•
Navigate to the Setup menu and then Local Settings. For more information,
see "Local Settings" on page 17.
Options button
•
Press the Options button while viewing photos. You will be given most of the
same options as in Local Settings, with the addition of Copy File. This
function allows you to copy a photo from a memory card and paste it to internal
memory, for example. After choosing Copy File, you will be given a list of
destinations on the frame. Simply choose the destination you prefer and the file
will be pasted there.

Printing a Photo

You can print a photo to any PictBridge-compatible printer.
First make sure that you have connected a PictBridge-compatible printer to your HP
Smart Wi-Fi display using the supplied USB to mini-USB connector. The USB
connector should be attached to the printer, and the mini-USB connector should be
attached to your HP Smart Wi-Fi Display.
Note: Make sure that USB Mode is set to Printer, according to the instructions in
"Local Settings" on page 17.
While viewing a photo that you would like to print, press the Print button on the
remote control. You will be asked to confirm that you want to print the photo.
Navigate to Yes and press the Select button.
23