Cleaning; Cleaning The Body Of The Dehumidi Er - Philips DE5205 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 107
3
Remove the water tank from the
dehumidi er ( g.v).
4
Insert the Philips provided hose into
the drainage hole ( g.{).
5
Push the protective cover of
drainage outlet rightwards to open
it ( g.|).
6
Connect the hose to the drainage
outlet ( g.}).
7
Put the water tank back into the
dehumidi er ( g.y).
Note
Put the water tank back in to
the dehumidi er even using
the continuous drainage, or the
dehumidi er can not operate
normally.
Make sure the hose ts tightly
so that no water leaks from the
dehumidi er.
When using the continuous
drainage, make sure the hose is laid
at and not knotted.
Make sure the hose is not immersed
in water, nor raised higher than the
continuous drainage hole.
Place the outlet of the hose in
somewhere it can easily drain.
Check the dehumidi er once a week
when draining water continuously
or left unattended for an extended
period of time.
12
EN

6 Cleaning

Note
Always turn the appliance o and
unplug the appliance from the
electrical outlet before cleaning.
Never immerse the appliance in
water or any other liquid.
Never use abrasive or aggressive
cleaning agents such as bleach
or alcohol to clean any part of the
appliance.
Only the pre- lter is washable. The
air puri cation lter is not washable.
Do not attempt to clean the lter or
air quality sensor with a vacuum.
Cleaning the body of the
dehumidi er
Regularly clean the inside and outside
of the dehumidi er to prevent dust from
collecting.
1
Use a soft, dry cloth to clean both
the interior and exterior of the
appliance.
2
The air outlet can also be cleaned
with a dry, soft cloth.

Publicité

Table des Matières
loading

Table des Matières