Connections - Denon DN-HC4500 Mode D'emploi

ENGLISH

2 CONNECTIONS

CONNECTIONS
1. Turn off the POWER switch.
2. Connect the RCA pin cords to the inputs on your mixer.
COUTION:
• Be sure to use the supplied control cord. Using another type of cable may result in damage.
• Be sure the power is off when connecting the control cord. Otherwise the units may not work properly.
RCA Cord
3.5 mm stereo mini cord
CH2 Input jack
RCA Cord
CH2 Fader jack
Drive1 Output jack
Deck1
Fader jack
Deck1 Output jack
Some features will not work for DN-D4000.
CH4 Input jack CH6 Input jack
CH4 Fader jack
DN-X900
3.5 mm stereo
mini cord
DN-D4000/
DN-D4500/
BU4500
Drive1 Fader jack
DN-HC4500
DENON PC/MAC Upgrade
Application and ASIO Driver
Application included.
CH6 Fader jack 3.5 mm stereo mini cord
CH8 Input jack
RCA Cord
CH8 Fader jack
3.5 mm stereo
mini cord
Drive2 Fader jack
Drive2 Output jack
DRIVE terminal
USB B terminal
Computer OS versions that can be
connected to the DN-HC4500:
Windows XP SP2
Mac OSX 10.4 or later
Computers with other operating
systems are not compatible with USB
MIDI, so the computer may operate
erratically after connected to the DN-
HC4500 by USB.
2
ENGLISH
Connection to a PC
• The DN-HC4500 is a plug-and-play device.
This means that when the DN-HC4500 is first
connected to your computer, the driver is
installed automatically.
• To connect the DN-HC4500 and a PC via a usable
USB port, use the included USB cable.
• When connected, the display below appears at
the bottom right of the PC's screen.
RCA Cord
Found New Hardware
USB audio device
X-control
Once installation is completed, the message
"Your new hardware is installed and ready to
use." is displayed, as shown below.
Found New Hardware
Your new hardware is installed and ready to use.
Installation is now complete. The DN-HC4500 is
now usable.
Deck2
Connection to a Macintosh computer
Fader jack
• The DN-HC4500 is plug-and-play device based on
Deck2 Output jack
the Macintosh OS, and is immediately ready for
use when connected.
• To connect the DN-HC4500 and Macintosh
computer via a usable USB port, use the included
USB cable.