Miele GDU 45/60-1 Notice D'installation page 26

G
8. Fitting a plinth facing
If the dishwasher is installed in a kit-
chen with a continuous kitchen plinth
facing the next step will not be
necessary.
Follow the instructions given in the
Dishwasher installation diagram for
aligning an integrated dishwasher
plinth fascia.
The plinth facing supplied will fit without
modification when:
– the plinth recess is at its maximum
depth of 100 mm, and
– the machine is set to its maximum
height (feet fully extended to 6 cm).
If the machine height is lower than the
maximum, and the plinth recess is less
than 100 mm, the plinth facing will need
to be trimmed to size (to ensure that the
door and plinth facing do not touch
when the door is opened). To calculate
the required height of the plinth facing:
^ On either side, push the spring clips
to the side and push the brackets
right in.
26
If the feet are only slightly extended:
The fixing brackets face upwards.
If the feet are more fully extended:
The fixing brackets face downwards.