Télécharger Imprimer la page

ERMILA 4417 Mode D'emploi page 9

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
Description of parts (Fig. 1)
A Heating plates, flexible
B Handle
C Mains cable with anti-twist device
D Temperature controller
E On/off switch
F LED display
Operation
· Connect to the mains power supply.
· Using the on/off switch (E), switch on the appli-
ance (Fig. 2ⓐ). LED display (F) is red.
· Set the desired temperature (150°C–230°C).
· To increase the temperature, move the tempera-
ture controller in a clockwise direction (Fig. 3ⓐ).
· To reduce the temperature, move the temperature
controller in an anticlockwise direction (Fig. 3ⓑ).
· Once the operating temperature has been
reached, the LED display (F) flashes.
· After use, switch off the appliance with the on/off
switch (Fig. 2ⓑ). The LED display goes out.
· Disconnect from the mains power supply.
· Allow the appliance to cool down.
TITANIUM-, CERAMIC- and TOURMALINE-coated
heating plates (depending on model)
Negative ions have an antistatic effect and are gen-
tle to the hair. They close the scale layer, creating
a smooth, silky hair surface and lock in the natural
moisture of the hair, thereby creating the ultimate
shine.
·
Tips for successful styling
· Wash hair, rinse and dry well.
· Brush or comb hair.
· Section off individual strands of hair.
· At the hairline, place a section of hair between
the heating plates.
· Keep the straightener pressed together and
slowly pull it down the section of hair away from
the head.
· Note: Do not leave the sections of hair in the
straightener for more than a few seconds,
otherwise this could damage the hair.
· Open the straightener and allow the section of
hair to slip out.
· Repeat the procedure until the desired result has
been achieved.
Cleaning and care
· Before cleaning the appliance, disconnect from
the mains and allow it to cool down.
· Do not immerse the appliance in water.
· Only wipe the appliance with a soft cloth, which
may be dampened slightly. Do not use solvents
or abrasives!
· D isposal in EU countries
Do not dispose of the appliance with the
domestic refuse. As part of the EU Directive
governing the disposal of electrical and elec-
tronic equipment, the appliance is accepted
free of charge by local waste collection
points or recycling centres. Correct disposal
will ensure environmental protection and
prevent any potentially harmful impacts on
people and the environment.
Disposal in non-EU countries
At the end of its service life, please dispose
of the appliance in accordance with statutory
requirements.
ENGLISH
de
en
fr
it
es
pt
nl
sv
no
fi
tr
pl
cs
sk
hu
sl
ro
bg
ru
uk
el
ar
9

Publicité

loading

Produits Connexes pour ERMILA 4417