Pioneer DDJ-SX2 Mode D'emploi page 7

8 LOOP 2X button
Doubles the loop playback length.
[SHIFT] + press:
During loop playback, moves the loop to the right by the amount
equal to its length. (Loop Shift)
9 LOOP IN button
Loop In Point is set.
[SHIFT] + press:
The loop slot switches.
Press for over 1 second:
Turns the auto 4-beat loop on.
a LOOP OUT button
The loop out point is set, and loop playback begins.
[SHIFT] + press:
Cancels loop playback. (Loop Exit)
After loop playback is canceled, playback returns to the previously
set loop in point and loop playback resumes. (Reloop)
b FLIP MODE SLOT button
c FLIP MODE REC button
d FLIP MODE START button
Allows you to record or call sequences such as HOT CUE operation.
This function (Serato Flip) needs to be activated before it can be used.
For details, visit the Pioneer DJ support site below.
http://pioneerdj.com/support/
e HOT CUE mode button
Sets the hot cue mode.
[SHIFT] + press:
Sets the cue loop mode.
Press for over 1 second:
Turns the quantize on/off.
f ROLL mode button
Sets the roll mode.
[SHIFT] + press:
Sets the saved loop mode.
g SLICER mode button
Sets the slicer mode.
[SHIFT] + press:
Sets the slicer loop mode.
h SAMPLER mode button
Sets the sampler mode.
[SHIFT] + press:
Sets the velocity sampler mode.
i Performance pads
Control the hot cue, loop roll, slicer, sampler and other functions.
j PARAMETER button, PARAMETER button
Sets a parameter for the loop roll, slicer, sampler and other functions.
k PLAY/PAUSE
button
Use this to play/pause tracks.
[SHIFT] + press:
The track returns to the temporary cue point and playback continues
from there. (Stutter)
l CUE button
This is used to set, play and call out temporary cue points.
[SHIFT] + press:
Loads the previous track in the track list. (Previous Track)
m SYNC button
The tempos (pitches) and beat grids of tracks on multiple decks can
be synchronized automatically.
[SHIFT] + press:
Cancels the sync mode.
n SHIFT button
When another button is pressed while pressing the [SHIFT] button, a
different function is called out.
For details on operation using the [SHIFT] button, see the
Operating Instructions.
o DECK button
Switches the deck to be operated.
Pressing the [DECK3] button while holding down the [DECK1] but-
ton or pressing the [DECK1] button while holding down the [DECK3]
button:
Turns on DUAL DECK mode on the left deck.
Pressing the [DECK4] button while holding down the [DECK2] but-
ton or pressing the [DECK2] button while holding down the [DECK4]
button:
Turns on DUAL DECK mode on the right deck.
p GRID ADJUST button
When the jog dial is turned while pressing the [GRID ADJUST] but-
ton, the beat grid interval can be adjusted.
[SHIFT] + press:
Sets a beat marker. (Grid Set)
q GRID SLIDE button
When the jog dial is turned while pressing the [GRID SLIDE] button,
the overall beat grid can be slid to the left or right.
[SHIFT] + press:
Clears the beat markers. (Grid Clear)
r SLIP button
Turns the slip mode on and off.
[SHIFT] + press:
This switches the vinyl mode on/off.
s CENSOR button
The track is played in the reverse direction while the [CENSOR] but-
ton is pressed, and normal playback resumes when the button is
released.
[SHIFT] + press:
The track is played in the reverse direction. When the [SHIFT] and
[CENSOR] buttons are pressed again, reverse playback is canceled
and normal playback resumes.
t PANEL SELECT button
The panel display switches in the order below each time the button
is pressed.
Panel display off [REC] panel
Panel display off ...
[SHIFT] + press:
The panel display switches in the order below each time the button
is pressed.
Panel display off [SP-6] panel
Panel display off ...
[FX] panel [SP-6] panel
[FX] panel [REC] panel
En
7