Pioneer DDJ-SX2 Mode D'emploi page 10

Operation
Wait until all connections between devices have been completed
before connecting the AC adapter.
Be sure to turn off the power and unplug the AC adapter from the
power outlet before making or changing connections between
devices.
Refer to the operating instructions for the component to be
connected.
Only use the AC adapter included with this unit.
Power is supplied to this unit by the AC adapter.
Connect this unit and the computer directly using the included USB
cable.
A USB hub cannot be used.
Connections
1 Connect headphones to one of the [PHONES]
terminals.
2 Connect powered speakers, a power amplifier,
components, etc., to the [MASTER OUT 1] or [MASTER
OUT 2] terminals.
INST. DOUBLES INST. DOUBLES INST. DOUBLES INST. DOUBLES
FLIP
SLOT REC START
SAVE LOOP ON/OFF
SYNC OFF SYNC OFF
CUE LOOP SAVED LOOP SLICER LOOP VELOCITY SAMPLER CUE LOOP SAVED LOOP
4 BEAT
To output the sound from the [BOOTH OUT] terminals, connect
speakers or other devices to the [BOOTH OUT] terminals.
For details on connecting the input/output terminals, see the
Operating Instructions.
3 Connect this unit to your computer via a USB cable.
USB cable
(included)
4 Turn on the computer's power.
10
En
INST. DOUBLES INST. DOUBLES INST. DOUBLES
FLIP
SLOT REC START
SAVE LOOP ON/OFF
SYNC OFF
CUE LOOP SAVED LOOP SLICER LOOP VELOCITY SAMPLER
4 BEAT
FLIP
SLOT REC START
SAVE LOOP ON/OFF
SLICER LOOP VELOCITY SAMPLER
4 BEAT
Powered speakers, etc.
INST. DOUBLES INST. DOUBLES INST. DOUBLES
FLIP
SLOT REC START
SAVE LOOP ON/OFF
SYNC OFF
CUE LOOP SAVED LOOP SLICER LOOP VELOCITY SAMPLER
4 BEAT
5 Connect the power plug to the AC adapter.
Slide the power plug into the AC adapter's guide rails as shown on the
diagram and press in until a click is heard.
For detailed cautions on the AC adapter, see "About the AC
adapter" (p. 13 ).
The shape of the plug differs according to the region in which the
unit is sold.
6 Connect the AC adapter.
INST. DOUBLES
FLIP
SLOT REC START
SAVE LOOP ON/OFF
SYNC OFF
CUE LOOP SAVED LOOP SLICER LOOP VELOCITY SAMPLER
4 BEAT
SYNC OFF
CUE LOOP SAVED LOOP
7 Press the [STANDBY/ON] switch on this unit's rear
panel to turn this unit's power on.
Turn on the power of this unit.
For Windows users
The message [Installing device driver software] may appear
when this unit is first connected to the computer or when it is
connected to a different USB port on the computer. Wait a while
until the message [Your devices are ready for use] appears.
8 Turn on the power of the devices connected to the
INST. DOUBLES
output terminals (powered speakers, power amplifier,
components, etc.).
When a microphone, DJ player or other external device is con-
FLIP
SLOT REC START
nected to input terminals, the power of that device also turns on.
SAVE LOOP ON/OFF
SYNC OFF
CUE LOOP SAVED LOOP SLICER LOOP VELOCITY SAMPLER
4 BEAT
To power outlet
AC adapter
(included)
INST. DOUBLES INST. DOUBLES INST. DOUBLES INST. DOUBLES
FLIP
SLOT REC START
SAVE LOOP ON/OFF
SYNC OFF
SLICER LOOP VELOCITY SAMPLER
4 BEAT
SYNC OFF
CUE LOOP SAVED LOOP SLICER LOOP VELOCITY SAMPLER
FLIP
SLOT REC START
SAVE LOOP ON/OFF
CUE LOOP SAVED LOOP SLICER LOOP VELOCITY SAMPLER
4 BEAT
INST. DOUBLES INST. DOUBLES INST. DOUBLES INST. DOUBLES
FLIP FLIP
SLOT REC START SLOT REC START
SAVE LOOP ON/OFF SAVE LOOP ON/OFF
SYNC OFF
CUE LOOP SAVED LOOP SLICER LOOP VELOCITY SAMPLER
4 BEAT 4 BEAT