Pioneer DDJ-SX2 Mode D'emploi page 12

Importing tracks
The following describes the typical procedure for importing tracks.
There are various ways to import tracks with the Serato DJ software.
For details, see the Serato DJ software manual.
If you are already using Serato DJ software (Scratch Live, ITCH or
Serato DJ Intro) and have already created track libraries, the track
libraries you have previously created can be used as such.
If you are using Serato DJ Intro and have already created track librar-
ies, you may have to reanalyze the tracks.
1 Click the [Files] key on the Serato DJ software screen
to open the [Files] panel.
The contents of your computer or the peripheral connected to the com-
puter are displayed in the [Files] panel.
2 Click the folder on the [Files] panel containing the
tracks you want to add to the library to select it.
3 On the Serato DJ software screen, drag and drop the
selected folder to the crates panel.
A crate is created and the tracks are added to the library.
b
a [Files] panel
b Crates panel
Loading tracks and playing them
The following describes the procedure for loading tracks into deck [1] as
an example.
INST. DOUBLES
INST. DOUBLES INST. DOUBLES
FLIP
SLOT REC START
SAVE LOOP ON/OFF
SYNC OFF
CUE LOOP SAVED LOOP SLICER LOOP VELOCITY SAMPLER
4 BEAT
1 Rotary selector
2 BACK button
3 LOAD button
1 Press this unit's [BACK] button, move the cursor to
the crates panel on the computer's screen, then turn the
rotary selector to select the crate, etc.
12
En
INST. DOUBLES
INST. DOUBLES INST. DOUBLES
FLIP
SLOT REC START
SAVE LOOP ON/OFF
SYNC OFF
CUE LOOP SAVED LOOP SLICER LOOP VELOCITY SAMPLER
4 BEAT
2 Press the rotary selector, move the cursor to the
library on the computer's screen, then turn the rotary
selector and select the track.
b
a Library
b Crates panel
3 Press the [LOAD] button to load the selected track
onto the deck.
a
Playing tracks and outputting the sound
The following describes the procedure for outputting the channel 1
sound as an example.
Set the volume of the devices (power amplifier, powered speakers,
etc.) connected to the [MASTER OUT 1] and [MASTER OUT 2]
terminals to an appropriate level. Note that loud sound will be output
if the volume is set too high.
INST. DOUBLES
4
5
6
7
8
9
f
4 TRIM control
5 EQ (HI, MID, LOW) controls
6 FILTER control
7 Headphones CUE button
INST. DOUBLES INST. DOUBLES INST. DOUBLES
a
b
c
d
e
g
a
h