English - Baumer VeriSens ID Guide D'installation Rapide

Important safety instructions
WARNING!
VeriSens ® emits bright, pulsed light
!
(Risk group 1 or 0 for devices with
infrared illumination).
Bright, pulsed light can cause damage
to the eyes and seizures.
Never look directly into the pulsed
light from the LEDs!
Detailed safety instructions can be found
in technical documentation, chapter 3:
www.baumer.com/vs-docs
Operating conditions:
Storage temperature – 20 °C ... + 70 °C
Operating + 5 °C ... + 50 °C @ measure-
temperature ment point housing rear
Humidity 0 % ... + 90 %
(non-condensing)
Application Suite (www.baumer.com/vs-sw)
The Application Suite helps you to create, manage and test jobs and to configure
them for real-time mode.
Image display
options
Display screen
Job bar
Device menu
Job menu

English

ATTENTION!
The device may become very warm during
!
operation. High temperatures may damage
the device. You must ensure that any heat
generated is dispersed by installing it with
the rear to a good heat conductor (such
as aluminum). The specified temperatures
must not be exceeded.
For optimum electrical noise immunity, the
!
use of shielded cables is recommended.
The appropriate cables can be obtained
from Baumer.
The vision sensor is a class A device
!
(DIN EN 55022:2011). It can cause
radio interference in residential
environments. Should this happen,
you must take reasonable measures
to eliminate the interference.
Conformity: CE, RoHS, WEEE, KC*, EAC*, UL*
(* device dependent)
Help, info and support
window
Parameter area
EN
EN
3 3