Baumer VeriSens ID Guide D'installation Rapide page 8

EN
8 8 EN
The mean gray-value currently measured in the field of
view is indicated as
The associated switching thresholds for Pass / Fail may be
adjusted by graphic input or by directly entering the
/ values.
MIN MAX
Confirm your settings with the
3. Configure interfaces
Select the appropriate settings on the tabs.
Output assignment, Flexible result conjunction
(device dependent)
Output time, Duration of output signal
Settings, as the data is transferred
(excluding VeriSens ® CS100)
Inputs via the process interface
(excluding VeriSens ® CS100)
Configuration web interface
4. Activate device
You can now activate VeriSens
displays the current statistics of each feature check, the
entire evaluation and live images.
.
BRIGHTNESS
button
OK
® . The Application Suite