Tension/Tilt, Sun End Position - Selve i-Marki Control W Notice D'utilisation

Programming
SETTING
WIND CONTROL, SUN INTERMEDIATE POSITION, SUN CANOPY

TENSION/TILT, SUN END POSITION

1. You have confirmed the TIME END POSITION menu level.
Note: This dialog window will only be displayed if a light sensor is
connected to the device.
2. SUN INTERMEDIATE POSITION will appear.
3. Use the +/- button to choose between SUN INTERMEDIATE
POSITION, SUN CANOPY TENSION/TILT, SUN END PO-
SITION.
4. Confirm by pressing OK.
5. The function SUN INTERMEDIATE POSITION has now been
set.
Please read on for further programming options using the
SETTING menu.
57
GB