Setting Sun/Delay - Selve i-Marki Control W Notice D'utilisation

Programming
SETTING
SUN/DELAY
1. Press the MENU button.
2. To select the SETTING menu, press the + button until SETTING
appears.
3. Confirm by pressing OK.
Note: This dialog window will only be displayed if a light sensor is
connected to the device.
4. SUN will appear.
5. Use the +/- button to adjust the sunlight setting. (The two left-
hand figures on the display show the current sunlight setting.)
Note: The dialogue field only displays DELAY
the EXPERT MODE is set to ON in the functions menu.
6. Confirm by pressing OK. DELAY
7. Use the +/- button to adjust the delay time.
appears.
53
and DELAY when
GB