Intermediate Position, Canopy Tension/Tilt, Winter Off/On - Selve i-Marki Control W Notice D'utilisation

Programming
SETTING
INTERMEDIATE POSITION, CANOPY TENSION/TILT, WINTER
OFF/ON
1. You have confirmed the SUN/DELAY menu levels. INTER-
MEDIATE POSITION will appear.
2. You can set the switching time to move to the INTERMEDIATE
POSITION using the +/- button. The switching time is indicated
in a few seconds or you can move to the INTERMEDIATE
POSITION from the upper end limit using the DOWN/UP button.
3. Confirm by pressing OK. CANOPY TENSION/TILT will appear.
4. You can set the switching time to move to CANOPY TENSION/
TILT using the +/- button. The switching time is indicated in a
few seconds or you can move to the CANOPY TENSION/TILT
from the lower end limit using the UP/DOWN button.
Confirm by pressing OK.
5. You have confirmed the CANOPY TENSION/TILT menu level.
WINTER OFF/ON will appear.
6. Use the +/- button to switch the WINTER function on or off.
Confirm by pressing OK.
7. The function WINTER OFF/ON has now been set.
Please read on for further programming options using the
SETTING menu.
55
GB