Wind Control, Time End Position, Time Intermediate Position, Time Canopy Tension/Tilt; Wind Control - Selve i-Marki Control W Notice D'utilisation

GB
Programming
SETTING
WIND CONTROL, TIME END POSITION, TIME INTERMEDIATE
POSITION, TIME CANOPY TENSION/TILT
1. You have confirmed the WINTER OFF/ON menu level. WIND
CONTROL will appear.
2. Use the +/- button to adjust the wind setting. (The two left-hand
figures on the display show the current wind setting.)
3. Confirm by pressing OK.
Note: This dialog window is only displayed for programmed switching
or blocking times.
4. TIME END POSITION will appear.
5. Use the +/- button to choose between TIME END POSITION,
TIME INTERMEDIATE POSITION, TIME CANOPY TENSION/
TILT.
6. Confirm by pressing OK.
7. The function TIME END POSITION has now been set.
Please read on for further programming options using the
SETTING menu.
56