Siemens Simatic Externer Prommer Notice D'utilisation page 28

Quick Reference Guide
Immunity to electrostatic discharge
(ESD)
Immunity to high–frequency
radiation
Ambient conditions
Temperature
Operation
Storage/transport
Relative humidity
Üperation
Storage/transport
Mechanical ambient conditions
Oscillations
Operation
Shock
Operation
Connecting cable to PC
Part no.
Length
Type
Note
A class 2 power supply unit is supplied for the USA and Canada.
10
External Prommer
to IEC 801–2
8 kV, contact discharge, on prommer
without plugged submodules
8 kV, contact discharge, on plugged
memory card
2kV, contact discharge,
on plugged SIMATIC S5
submodule with protective cover
to IEC 801–3
10 V/m with 80% amplitude modulation
with 1 kHz (27 MHz – 1 GHz)
tested to DIN IEC 68–2–1, DIN IEC
68–2–2
+5 C to +40 C, temperature
change max. 10 K/h
–20 C to +60 C, temperature
change max. 20 K/h
tested to DIN IEC 68–2–3
5% to 95% at 25 C
5% to 95% at 25 C
tested to DIN IEC 68–2–6
10 to 60 Hz: amplitude 0.075 mm
2
60 to 500 Hz: acceleration 9.8 m/s
tested to DIN IEC 68–2–27
2
half–sine: 150 m/s (15 g), 11 ms
C79195–A3863–H150
150 cm
25–core twisted, shielded
2 x 25–pin Cannon connectors
External Prommer
C79000-K8576-C120-02