Front Connections; Leds; Connecting The Power Supply - Siemens Simatic Externer Prommer Notice D'utilisation

Quick Reference Guide
2.2

Front Connections

The following connections can be found on the front of the PG:
LED Power (green)
SIEMENS
Module 1
SIMATIC
memory
cards
LED Busy (yellow)
2.3

LEDs

Inscription Color Significance
Power green illuminates when a 9 V power supply
is connected
Busy yellow illuminates as long as a submodule is
being accessed
2.4

Connecting the Power Supply

Proceed as follows:
1. Plug the DC 9V supply cable from the power supply unit into the DC
9V 3W power supply connector on the external prommer.
2. Connect the power supply unit to your AC 230 V or AC 115 V mains
power socket.
Note
When the device is connected correctly, the green Power LED is
illuminated. If the contacts of the power supply connector are dirty,
we cannot guarantee that the prommer will function without errors
occurring.
4
External Prommer
SIMATIC S5 module
Module 2
Power
Busy
External Prommer
C79000-K8576-C120-02