Resetting The Values For The Day - Tanita AM-120E Manuel D'instructions

Eng

Resetting the Values for the Day

At 0:00 am (midnight) every day, this device automatically saves the measurement values
to the memory. You can reset the current day's measurement values to [0] any time before
0:00 am.
Note: If you reset current day's values, you cannot restore the values.
Note: You cannot reset the week's exercise.
Note: Measurement values already stored in the memory and initial settings are not deleted.
Note: The Basal Metabolic Rate is calculated from your personal settings, and is therefore
not deleted.
1) Press and hold the CLEAR button
for more than 5 seconds while
current day's values are shown in
the display.
2) Current day's values are reset.
28