Tanita AM-120E Manuel D'instructions page 10

Eng Fitting/Replacing Batteries
Request:
Must Do
Check to make sure that the inner ring is inserted correctly into the groove.
If the inner ring does not sit properly in the groove, it may be inserted upside
down.
Make sure that the protruding section of the inner ring and groove of the body
are lined up correctly both horizontally and vertically, and insert the inner ring.
4) Make sure the
electrode is facing upwards, and
insert the edge of the batteries in
the direction of the arrows shown.
5) Insert the battery cover in the
direction of the arrow.
6) Tighten the battery cover screws
firmly
The time display will flash [0:00]. Set
the time display to the correct time.
For details see "Setting the Time"
on P. 11.
10
(positive)