Troubleshooting And Repair; Tools Needed; General Troubleshooting - BIG ASS FANS COLD FRONT 300 Mode D'emploi

Masquer les pouces Voir aussi pour COLD FRONT 300:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

TROUBLESHOOTING AND REPAIR

Disconnect the power supply before performing any service or maintenance.
Please use caution when troubleshooting or repairing all electrical components. Ensure all power is
disconnected from the cooler before the cooling pads or fan guard are removed to gain access to the fan.

Tools needed

• Screwdrivers
• Pliers
• Adjustable wrenches
• Volt/Ohm meter (electrical troubleshooting)
Additional tools may be required.

General troubleshooting

The cooler consists of three systems:
• Pump
• Water distribution system
• Fan system
Use the troubleshooting tables on the following pages to determine which system(s) require servicing.
8
WARNING
ELECTRICAL SHOCK HAZARD
Failure to do so may result in serious injury or death.
CAUTION
WWW.BIGASSFANS.COM
© 2020 DELTA T LLC
ALL RIGHTS RESERVED.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cold front 400Cold front 500

Table des Matières